Product model: 815W / L-D, 830W / L-D
Nominal diameter: DN65 ~ 700mm, NPS 2-1 / 2 "~ 28"
Nominal pressure: CL150 ~ 300LB
Applicable media: gas, water and oil, etc
Applicable temperature: - 30 ~ + 150 ℃
Operating temperature: - 20 ~ 80 ℃
Connection type: clamp
Main material: 304, 316, carbon steel
Product overview
The valve seat of electric high-performance butterfly valve adopts PTFE or metal stainless steel sealing material, which is mainly suitable for gas transportation and process media with high requirements for valve life, including steam transportation. It can also be used for special media, such as chlorine, oxygen, high vacuum, sulfur resistant or corrosive media, with AC 220V and 380V power supply voltage as driving power, The operation can be controlled by receiving the (4 ~ 20mA) voltage and current signal output by the industrial automation instrument control system.
STRUCTURAL DESIGN
The electric high-performance butterfly valve has fireproof structure, and the connection mode can be wafer type or lug type single flange for large pipe diameter and pipeline through terminal. The valve seat is designed with movable inserts outside. The tighter the flange clamp is, the greater the pressure resistance, and the better the sealing performance. It is convenient and simple to replace the valve seat. The valve seat can be taken out by removing the inserts without dismantling the valve plate and valve shaft. The double eccentric butterfly plate with spherical sealing surface and single flexible lip seal seat are adopted, which is suitable for occasions requiring reliable sealing and good adjustment characteristics, Due to the design of double eccentric butterfly plate, it has tight sealing performance and long service life. It can be used to quickly cut off or adjust the flow.
Performance characteristics
1. There is no need to add O-rings and metal parts to assist the seal.
2. The lip seal structure can compensate for the changes of temperature and pressure on the valve.
3. There is almost no friction during sealing to ensure less torque and better sealing.
4. Lip seal structure can compensate for temperature and pressure changes.
5. Long service life and small maintenance; Two way bubble free seal.
6. The valve seat does not contact the butterfly plate when it is opened and in the middle position.
7. There are no wear points at the upper and lower parts of the valve seat, the torque is low, and the requirements for the operating mechanism are small.
MAIN PERFORMANCE PARAMETERS
Valve series | Design form | Pressure level | Specifications(in) | Applicable temperature ℃ | Shell material | Adopt standard |
815Wseries | Wafer type | 150Class | 2-1/2～30 |
-29～+260 | WCB carbon steel CF8M Monel | API 609 |
815Lseries | Lug type | 2-1/2～60 | ||||
830Wseries | Wafer type | 300Class | 3～24 | |||
830Lseries | Lug type | 3～36 |
MAIN TECHNICAL PARAMETERS
Nominal diameter | 65～700mm |
Nominal pressure | 150～300LB |
Applicable temperature | -30～+150℃ |
Connection mode | Wafer type |
Valve structure | Two eccentric and three eccentric |
body material | 304、316、carbon steel |
Valve plate material | 304、316 |
Sealing material | PTFE(Customizable reinforced PTFE) |
Applicable media | Gas, water and oil, etc |
TECHNICAL PARAMETERS OF ACTUATOR
ambient temperatureActuator category | Imported actuator | Imported 3610r series Executive | Imported HQ series Executive |
supply voltage | Standard: 220VAC single-phase optional: 110VAC single-phase, 380 / 440VAC three-phase, 24V / 110V / 220VAC | ||
Output torque | 50N.M~2000N.M | 50N.M~1500N.M | 50N.M~3000N.M |
Action range | 0~90º 0~360º | 0~90º | 0~90º、0º~270ºOptional |
control mode | Switch in place lamp (switch two position control), passive contact signal, 1 / 5K potentiometer, intelligent regulation (4-20mA analog signal control) | ||
Action time | 15s/30s/60s | 10s/15s/30s | 18S~112S |
Protector | Overheat protection | overload protection | Built in overheating protection and overload protection |
-30º~60º | -30º~60º | -20º~＋70℃ | |
Manual operation | Same as attached handle operation | Same as attached handle operation | Mechanical clutch mechanism with handwheel operation |
Mechanical limit | Electrical and mechanical double limit | Electrical and mechanical double limit | Two external adjustment bolts |
Degree of protection | IP65 | IP55 | IP65、IP67、CustomizableIP68 |
Explosion proof grade | No explosion-proof | Exd II BT4 | EXd II BT4 ,EXd II CT6 |
Position measurement | Optional switch or potentiometer | Comparison control unit | Potentiometer, comparator control unit |
Drive motor | 8W/E | ACReversible motor | Squirrel cage asynchronous motor |
Wiring interface | PE1/2'' Incoming line lock | 2-PE 1/2'' Incoming line lock | 2个PE 3/4'' |
Shell material | aluminium alloy | Steel, aluminum alloy | Steel, aluminum alloy, aluminum bronze, polycarbonate |
Outer coating | Dry powder, epoxy polyester, with super anti-corrosion function | ||
MAIN OVERALL DIMENSIONS
Nominal diameter(mm) | NPS（in） | Size（mm） | ||||
L | L1 | D1 | D | H | ||
65 | 2-1/2 | 49 | 27 | 119 | 59 | 177 |
80 | 3 | 49 | 27 | 132 | 73 | 193 |
100 | 4 | 54 | 30 | 157 | 95 | 212 |
125 | 5 | 64 | 30 | 186 | 111 | 216 |
150 | 6 | 57 | 33 | 216 | 142 | 243 |
200 | 8 | 57 | 36 | 270 | 188 | 299 |
250 | 10 | 71 | 41 | 324 | 236 | 371 |
300 | 12 | 81 | 48 | 381 | 282 | 416 |
350 | 14 | 92 | 52 | 413 | 314 | 494 |
400 | 16 | 102 | 56 | 470 | 363 | 531 |
450 | 18 | 114 | 67 | 533 | 414 | 569 |
500 | 20 | 127 | 67 | 584 | 456 | 604 |
600 | 24 | 154 | 76 | 692 | 549 | 784 |
700 | 28 | 167 | 87 | 857 | 702 | 912 |
