Product model: D67L1X
Nominal diameter: DN50-600mm
Pressure rating: PN1.0, 1.6Mpa
Valve body material: nodular cast iron, 304, 316
Applicable media: water, liquid, gas, oil, powder, steam, viscous, containing particles, etc
Design and manufacture: GB / T12238-2008
Connection standard: JB / T 79.1-1994, ASME B16.10
Structure length: GB / T12221-2005, ASME B16.5
Pressure test: GB / T13927-2008
PRODUCT OVERVIEW
The pneumatic lug type center line butterfly valve is composed of lug type butterfly valve and pneumatic actuator. The air source drives the valve rod to drive the circular butterfly plate as the opening and closing part, and rotates with the valve rod to open, close and regulate the fluid, so as to realize the requirements of on-site operation and remote centralized control. It is widely used in chemical industry, petroleum, papermaking, fire pipeline, drainage, sewage, food, heating, gas, shipping, hydropower, metallurgy, energy system, light textile and other industries.
PRODUCT FEATURES
1. The valve is small and light, easy to disassemble and repair, and can be installed at any position.
2. The structure is simple and compact, and the 90 ° rotary opening is fast.
3. Small operating torque, labor-saving and light.
4. The flow characteristic of the valve tends to be linear and has good regulation performance.
5. The number of opening and closing tests is up to tens of thousands, and the service life is long.
6. The seal can be replaced, the seal is reliable, the two-way seal is achieved, and the gas test leakage is zero.
7. The sealing material is resistant to aging and corrosion, and can be applied to a variety of media.
MAIN TECHNICAL PARAMETERS AND PERFORMANCE
GTD/DATechnical parameters of pneumatic actuator | Valve body parameters | ||
Type | Double acting piston type, spring return type | Nominal diameter | DN50～600mm |
Air source pressure | Double acting: 2-8bar / single acting: 4-8bar | Nominal pressure | PN1.0、1.6MPa |
Output torque | Double acting: 4N · m ~ 10560n · M | Valve shaft material | Carbon steel, 304 / 316 / 316L stainless steel |
Single action: 7N · M ~ 2668N · M | Body material | Ductile iron, carbon steel, stainless steel | |
working temperature | Normal temperature type: - 20 ℃ ~ 80 ℃ (nitrile rubber O-ring) | Valve plate material | Ductile iron, 304 / 316 / 316L stainless steel, nylon |
High temperature type: - 20 ℃ ~ 160 ℃ (fluororubber O-ring) | Seat Tightness | EPDM、NBR、Wear resistant rubber | |
Action range | 0～90°±5° | structural style | Lug middle type, pin less type |
Interface thread | GTD40～GTD83/ATD50～ATD88 G1/8″ | Applicable temperature | EPDM≤80℃；NBR≤68℃ |
GTD110～GTD350/ATD100～200 G1/4″ | Applicable media | Water, air, natural gas | |
Valve position signal | Positioner: 4 ~ 20mA / responder: full open and full close signal | Product features | Wide application, low overall cost, large flow and small flow resistance |
Main overall connection dimensions
Nominal diameter DN | inch | Main dimensions（mm） PN10/PN16 | Actuator size | ||||||
L | D2 | H1 | H2 | n-Φd | A | P | B | ||
50 | 2 | 43 | 125 | 193 | 80 | 4-16 | 163 | 96 | 76 |
65 | 2-1/2 | 46 | 145 | 212 | 89 | 4-16 | 195 | 115 | 91 |
80 | 3 | 46 | 160 | 232 | 95 | 8-16 | 195 | 115 | 91 |
100 | 4 | 52 | 180 | 280 | 114 | 8-16 | 217 | 137 | 11 |
125 | 5 | 56 | 210 | 302 | 127 | 8-16 | 258 | 147 | 122 |
150 | 6 | 56 | 240 | 330 | 139 | 8-20 | 299 | 165 | 136 |
200 | 8 | 60 | 295 | 419 | 175 | 8-20/12-20 | 349 | 182 | 153 |
250 | 10 | 68 | 350/355 | 482 | 203 | 12-20/12-24 | 397 | 199 | 173 |
300 | 12 | 78 | 400/410 | 553 | 242 | 12-20/12-24 | 473 | 221 | 192 |
350 | 14 | 78 | 460/470 | 635 | 267 | 16-20/16-24 | 560 | 249 | 213 |
400 | 16 | 102 | 515/525 | 709 | 301 | 16-24/16-27 | 601 | 280 | 243 |
450 | 18 | 114 | 565/585 | 750 | 381 | 20-24/20-27 | 738 | 383 | 356 |
500 | 20 | 131 | 620/650 | 840 | 387 | 20-24/20-30 | 738 | 383 | 356 |
600 | 24 | 154 | 725/770 | 1021 | 457 | 20-27/20-33 | 940 | 434 | 415 |
